Ø电能质量管理系统
Ø谐波分析
Ø能源供应故障分析
Ø电压凹陷源位置
Ø瞬态干扰位置

主功能
ØClassA电能质量测量：谐波和间谐波，电压偏差，频率偏差，不平衡，波动和闪烁，瞬态干扰，EN50160统计
Ø0.2s级精度：谐波，基波，次谐波能量
Ø高分辨率故障记录：支持1024点/周期，最小间隔干扰记录为20us,8GB 记忆体
Ø故障诊断位置：支持电压暂降源，谐波源，闪烁源，非对称源位置和电源故障类型诊断
Ø完整的实时数据测量

义大利 彩色触控 NG-9/96 盘面式三相3回路电表

技术特点

96x96mm多功能仪表，带有彩色LCD电阻式触摸屏，三个5A电流输入和6个通道，用於采集能量数据和其他来源（温度，数字和模拟信号）。

• • 96 x96 mm的外壳适用於工业部门/大楼的中/低压电力中心;
  • 图形显示：3.5英寸液晶TFT，320x240像素，262k色，带电阻式触摸屏，显示清晰可读的测量结果;
  • 84个可以设置为零的象限上的功率累加器;
  • 仪器内的温度探头;
  • 时钟和日历;
  • 串口：RS485;
  • 协议：Modbus。

96x96mm Multifunction meter with Colour LCD resistive touchscreen,
three 1 to 5A current inputs and 6 channels to acquire energy data and
other sources’ (Temperature, digital and analogic signals).
> Bi-directional meter (Imported/delivered energy)
> 50 true value Measurements (RMS) on 4 quadrants
> The 96x96mm, 65mm deep case can be inserted in standard panels.
> Graphic display: 3.5” LCD TFT, 320x240pixel, 262k colors,
with resistive touchscreen, for a clear and readable displaying
of measurements.
> 84 Power Totalizers on 4 quadrants that can be set to zero.
> Temperature probe within the instrument.
> Clock and calendar.
> Current measurement modules available:
- Rogowski flexy sensors Ø from 100 mm
- Split Current Transformers
Ø6 mm - max 10A
Ø16 mm - max 100A
Ø24mm - max 200A
> New Generation sensors
Temperature measurement sensor NG-RTD
Analogic voltage or current Inputs sensor NG-AIN
Digital signal acquisition sensor NG-DIG
> Serial port: RS485
> Protocol: Modbus

List of Measurements
Direct measurements for single-phase
> Phase-neutral voltage L1-N
> Phase-neutral voltage L2-N
> Phase-neutral voltage L3-N
> Phase-phase voltage L1-L2
> Phase-phase voltage L2-L3
> Phase-phase voltage L3-L1
> Line current L1
> Line current L2
> Line current L3
Single-phase derived measurements
> Bi-directional active power L1 (positive=imported)
(Q1 and Q4), negative=exported (Q2 and Q3)
> Bi-directional active power L2 (positive=imported, negative=exported)
> Bi-directional active power L3(positive=imported, negative=exported)
> Bi-directional reactive power L1 (positive=imported (Q1and Q4)
> Bi-directional reactive power L2 (positive=imported)
> Bi-directional reactive power L3 (positive=imported)
> Distorting power L1 (indication of presence of current harmonics)
> Distorting power L2 (indication of presence of current harmonics)
> Distorting power L3 (indication of presence of current harmonics)
> Apparent power L1
> Apparent power L2
> Apparent power L3
> Power factor L1
> Power factor L2
> Power factor L3
Harmonics and THD
> Harmonics up to the 15°, both Voltage and Current
> Voltage and Current THD
Main measurements of three-phase system
> Three-phase equivalent voltage phase-neutral
> Three-phase equivalent voltage phase-phase
> Three-phase equivalent current
> Three-phase active power
(positive=imported, negative=exported) Bidirectional
> Three-phase reactive power
(positive=imported) Bi-directional
Secondary measurements of
three-phase system
> Three-phase equivalent distorting power
> Three-phase equivalent apparent power
> Three-phase equivalent power factor
> Calculated neutral current
> Ideal Neutral-center star Voltage, N-O
> Frequency (measured on voltage input L1
Integrated Energy values of 2 inputs
> Imported active Energy, Bench 1
> Exported active Energy, Bench 1
> Imported Inductive Energy (Q1), Bench 1
> Exported Capacitive Energy (Q2), Bench 1
> Exported Inductive Energy (Q3), Bench 1
> Imported Capacitive Energy (Q4), Bench 1
> Imported active Energy, Bench 2
> Exported active Energy, Bench 2
> Imported Inductive Energy (Q1), Bench 2
> Exported Capacitive Energy (Q2), Bench 2
> Exported Inductive Energy (Q3), Bench 2
> Imported Capacitive Energy (Q4), Bench 2

产品规格

• 双向电表（进口/交付能源）
• 50个四象限真实值（RMS）测量
• 外壳96×96可以嵌入标准面板上，深度为65毫米（80毫米包括模块）。
• 图形显示：3.5“液晶TFT，320x240像素，262k色，带电阻式触摸屏，清晰可读的测量显示。
• 图形显示最近3天的电压，电流，功率和COSφ。
• 通过确认请求可将4个像限上的12个功率累加器设置为零
• 欧元用於吸收和输送的能源
• 软件TA和TV反转功能
• 仪器内部的温度探头
• 时钟和日历
• 可选模块由4个集电极开路输入和2个Cleancontact输出提供，Optomos（独立参考质量）
• 可用的不同电流测量模块：
  • 与5A TA
  • 带罗戈夫斯基探头，测量范围：10至2000 A，Ø100 mm
  • 1V TA Calmp ON，Øint：24 mm，直到200A
• 串口：RS485
• 协议：Modbus和ETPRO。

目前可用的可选模块

• • 电流测量模块5A max（通过TA）
  • 电流测量模块125÷2000A（通过Rogowski探头）
  • 电流测量模块TA 1V，箝位开
  • 模块I / O：4个集电极开路输入+ 2路Optomos输出（干净触点），独立参考质量

List of Measurements 

Direct measurements for single-phase
> Phase-neutral voltage L1-N
> Phase-neutral voltage L2-N
> Phase-neutral voltage L3-N
> Phase-phase voltage L1-L2
> Phase-phase voltage L2-L3
> Phase-phase voltage L3-L1
> Line current L1
> Line current L2
> Line current L3
Single-phase derived measurements
> Bi-directional active power L1 (positive=imported
(Q1 and Q4), negative=exported (Q2 and Q3)
> Bi-directional active power L2
(positive=imported, negative=exported)
> Bi-directional active power L3
(positive=imported, negative=exported)
> Bi-directional reactive power L1 (positive=imported
(Q1and Q4)
> Bi-directional reactive power L2 (positive=imported)
> Bi-directional reactive power L3 (positive=imported)
> Distorting power L1
(indication of presence of current harmonics)
> Distorting power L2
(indication of presence of current harmonics)
> Distorting power L3
(indication of presence of current harmonics)
> Apparent power L1
> Apparent power L2
> Apparent power L3
> Power factor L1
> Power factor L2
> Power factor L3

Main measurements of three-phase system
> Three-phase equivalent voltage phase-neutral
> Three-phase equivalent voltage phase-phase
> Three-phase equivalent current
> Three-phase active power
(positive=imported, negative=exported) Bidirectional
> Three-phase reactive power (positive=imported)
Bi-directional
Secondary measurements of three-phase
system
> Three-phase equivalent distorting power
> Three-phase equivalent apparent power
> Three-phase equivalent power factor
> Calculated neutral current
> Ideal Neutral-center star Voltage, N-O
> Frequency (measured on voltage input L)

Integrated Energy values of three-phase
system
> Imported active Energy, Bench 1
> Exported active Energy, Bench 1
> Imported Inductive Energy (Q1), Bench 1
> Exported Capacitive Energy (Q2), Bench 1
> Exported Inductive Energy (Q3), Bench 1
> Imported Capacitive Energy (Q4), Bench 1
> Imported active Energy, Bench 2
> Exported active Energy, Bench 2
> Imported Inductive Energy (Q1), Bench 2
> Exported Capacitive Energy (Q2), Bench 2
> Exported Inductive Energy (Q3), Bench 2
> Imported Capacitive Energy (Q4), Bench 2

W1030是一个强大的功率分析仪，能够测量和记录主断路器
和4个连接的馈线的电气参数。使加上3个 W1024模块可将馈
线数量扩展到16个3相的馈线。
具有测量和记录所有馈线的电压，电流，中性线电流，功率
因数，有功，无功和视在功率，kWH，kVARH。
该设备可以测量和记录2到15电压，电流和中性线电流谐
波，主断路器的电压THD和电流THD。同时记录环境温度 和
变压器温度将 有助於监测和分析谐波负载的影响。
所有记录都存储在内部存储器4GB中，可经由USB下载或使
用互联网传输到 服务器。通过移动网络Wifi / RS485传送到服务器的测
量参数使得可以监视图表和 数据，以便计算损耗减少，负
载平衡，负载曲线，PF 等。

W1020是一个强大的功率分析仪，能够测量和记录主断路器
和4个连接的馈线的电气参数。使加上3个 W1024模块可将馈
线数量扩展到16个3相的馈线。
具有测量和记录所有馈线的电压，电流，中性线电流，功率
因数，有功，无功和视在功率，kWH，kVARH。
该设备可以测量和记录2到15电压，电流和中性线电流谐
波，主断路器的电压THD和电流THD。同时记录环境温度 和
变压器温度将 有助於监测和分析谐波负载的影响。
所有记录都存储在内部存储器4GB中，可经由USB下载或使
用互联网传输到 服务器。通过移动网络Wifi / RS485传送到服务器的测量
参数使得可以监视图表和 数据，以便计算损耗减少，负载平
衡，负载曲线，PF 等。



Attached: Multi-Feeder Power Analyzer -YYTL CH.pdf

Attached: W106 power analyzer datasheet YYTL.pdf

ME631 可接罗氏线圈mV/kA  或 Split Core CT 0.333VAC的信号, 电表可设定

Attached: ME631V3 data sheet YYTL.pdf

Attached: ME432 datasheet by YYTL 20161128.pdf

 Suit for voltage under 330V (L-N)/570V(L-L) (direct)
 Used for 4x3 phase or 12x1 phase circuit AC measuring
 Auto-distinguish mix connection of three phase and single phase, different circuit
can be set to different current
 Ture-RMS measuring parameter for U, I, P, Q, S, PF, F, kWh(Imp. & Exp.), kvarh
(Imp. & Exp.), Demand
 TOU, 4 tariffs, 8 time period in 24 hours
 Memory data per 15 min., Max. Memory 40days data
 SOE (event log) Record
 Support 100mA rated current input, CT primary up to 5000A
 LED light indicates Pulse Output, Run status and Communication status
 Standard 35mm DIN rail Mount
 RS485 port, MODBUS-RTU protocol

Attached: PMAC201HW Data Sheet (for 100mA) V4.0.pdf
Attached: PILOT PMAC211 Mulit-Circuit Energy Meter V1.0.pdf

 Measuring: 1 main circuit + 42 branch circuits
 DI/DO: 4 status inputs (dry contact) , 2 relay outputs, 1 pulse output
 Settable Pre-Alarm function:
Main circuit: Alarm for voltage, current, current unbalance
(optional alarm for leakage current/ temperature alarm)
Branch circuit: Alarm for current (lo-lo-limit, lo-limit, hi-limit, hi-hi-limit)
 Communication: RS485, support Modbus-RTU protocol
 Phase sequence of branch circuit is programmable
 Optional CT input for branch circuit: 50A, 100A, 200A
 Settable wiring for branch circuit: Either single phase or 3 phase
 Historical kWh record: kWh yearly consumption of last 10 years,
kWh monthly consumption of last 12 months\
Attached: PMAC202 AC BCPM Data Sheet V4.0.pdf